Basic Aluminium Chloride
High-basicity coagulant that barely moves pH — for oily, cold and low-alkalinity water
Basic aluminium chloride (BAC) is a pre-hydrolysed aluminium coagulant with a high basicity of 70–90% — a higher degree of polymerisation than conventional PAC. That structure leaves very little free acid to release in water, so dosing shifts pH only marginally and consumes far less alkalinity. Typical doses are 20–120 ppm, set by jar test.
The practical difference from PAC is where the two diverge: PAC offers a wider working range and lower cost per unit of Al₂O₃, while BAC suits streams that cannot tolerate a pH drop — low-alkalinity surface water, low-temperature and low-turbidity water where floc formation is slow, and oil-bearing effluent from machining, cold rolling, knitting and food processing, where its cationic polymer fraction helps break oil-in-water emulsions and lift colour. Because high-basicity liquids are viscous and prone to gelling at high concentration, liquid BAC is normally supplied at ≥ 10% Al₂O₃ and powder at ≥ 28%.
BAC is also less forgiving of overdosing than PAC: excess polymer can re-stabilise colloids and carry colour into the effluent, so dosing is best trimmed downward from a jar-test optimum. Supplied as colourless to pale-yellow liquid or white powder in 25 kg bags, 200 L drums and 1000 L IBCs, with batch COA per shipment.
Technical specifications
| Technical specifications | Unit | Value |
|---|---|---|
| Basicity | % | ≥ 70 (70–90 typical) |
| Al₂O₃ content (powder) | % | ≥ 28 |
| Al₂O₃ content (liquid) | % | ≥ 10 |
| pH (1% aqueous solution) | — | 3.5–5.0 |
| Water insolubles | % | ≤ 0.3 |
| Appearance | — | Colourless to pale-yellow liquid; white powder |
Typical values for reference only. Final specifications are confirmed per batch COA, available with every shipment.
Applications
- Oily wastewater from machining, cold rolling and metal drawing — demulsification and oil removal with DAF
- Textile dyeing and printing effluent where colour must be lifted without lowering pH
- Low-temperature, low-turbidity surface water where alum and standard PAC flocculate slowly
- Plants with tight discharge pH limits or insufficient alkalinity for conventional coagulant doses
Industries & Solutions: Industrial Wastewater, Textile & Dyeing Wastewater, Municipal Wastewater, Pulp & Paper Wastewater
Packaging & shipping
| Packaging | Net weight / volume |
|---|---|
| PP woven bag with PE inner liner (powder) | 25 kg |
| HDPE drum (liquid) | 200 L |
| IBC tote (liquid) | 1000 L |
Storage & shelf life
Powder: store dry, 12 months in sealed bags. Liquid: store between 5–35 °C, keep closed and out of direct sunlight; shelf life 6 months, and stir before use if the product has stood. Do not allow liquid to freeze.
Transport classification
BAC is not classified as a dangerous good under IMDG/IATA and ships as general cargo. Liquid grades are mildly acidic — check drum and IBC closures before shipment and protect from freezing in transit.
Safety
Mildly acidic product: avoid eye and skin contact, and wear gloves and goggles when handling liquid or dissolving powder. Do not mix with strong alkalis. Spills are slippery — flush with water. MSDS available on request.
Downloads
Request a quotation for Basic Aluminium Chloride
Send Inquiry
We use your data only to answer your inquiry. See our Privacy Policy.
Inquiry received
Thank you — your inquiry has been saved and sent to our sales team. Expect a reply within one business day.
Related products
PAC Poly Aluminium Chloride (PAC)
Coagulants & Flocculants
Inorganic polymer coagulant for suspended solids, phosphorus and colour removal
View product
Aluminium Sulfate (Alum, 18-Hydrate)
Coagulants & Flocculants
The classical low-cost coagulant for turbidity, colour and phosphorus removal
View product
Demulsifier (Oil–Water Separation Agent)
Specialty Chemicals
Breaks stable oil-in-water emulsions so flotation and settling can actually remove the oil
View product
CPAM Cationic Polyacrylamide (CPAM)
Coagulants & Flocculants
Charge-neutralizing flocculant for organic sludge dewatering and biosolids conditioning
View productRequest a quotation
Send your product, quantity and destination port — you will receive an offer with specifications, packaging and lead time.