Hanna Env logo HannaEnv

FAQ

The questions buyers ask before ordering — answered directly.

What is your minimum order quantity (MOQ)?

For standard powder products the usual export MOQ is one 20-foot container (FCL), typically 18–27 MT depending on product density and pallet pattern. Liquid products in drums or IBC totes can usually be combined with powder lines to fill a container.

Smaller trial quantities can often be arranged for new customers starting a supply relationship — send us your target volume and destination port and we will confirm what is feasible.

What payment terms do you accept?

Standard export terms are telegraphic transfer (T/T) with 30% advance and 70% against the bill of lading copy, or an irrevocable letter of credit at sight for larger or first contracts.

Other arrangements such as D/P are considered case by case once a trading history is established. All binding payment terms are stated in the proforma invoice.

What are your typical lead times?

Container orders of standard products are normally ready for shipment within 7–15 days of receiving the advance payment. The confirmed production and delivery schedule is stated in your quotation.

Products with special grade requirements or dangerous-goods documentation (e.g. hypochlorites) may need a few additional days for QC release and DG paperwork.

Do you ship dangerous goods such as sodium hypochlorite?

Yes. Sodium hypochlorite ships as UN 1791, Class 8 and calcium hypochlorite as UN 2880, Class 5.1 under the IMDG Code, in UN-approved packaging with the full set of dangerous-goods documents (DG declaration, packing certificate, MSDS).

Most of our range — PAC, PAM, PFS, ferrous sulfate, defoamers and antiscalants — is not classified as dangerous and ships as general cargo.

Do you provide samples before order confirmation?

Yes — 0.5 to 2 kg samples of standard products are provided free of charge, with the batch COA, so your laboratory can verify performance before you commit to a volume order.

Courier cost for samples is normally paid by the buyer. Jar-test support on your actual water sample is available on request.

Can you produce custom formulations or specific grades?

Within our existing product families we can adjust key parameters — for example polyacrylamide molecular weight and ionic charge, PAC basicity, or biocide active concentration — to match your water chemistry and equipment.

Send your specification or application description; our technical team will confirm feasibility, minimum volumes and any formulation surcharge before you order.

Do you supply COA and MSDS documents?

Every shipment leaves with a batch-specific Certificate of Analysis (COA) from our laboratory. The Material Safety Data Sheet (MSDS) for each product is available on request before ordering — request it through the inquiry form on any product page.

Technical Data Sheets (TDS) for the standard range can be downloaded directly from the Downloads section of this website.

How are products packed for export?

Powder products ship in 25 kg PP woven or kraft paper bags with PE inner liners, palletized and shrink-wrapped, or in 500–1,000 kg jumbo bags. Liquids ship in 25/30/200 L HDPE drums or 1,000 L IBC totes; dangerous goods use UN-approved packaging.

Palletizing, desiccant and export marking can be tailored to your market requirements — specify them in your inquiry.

Which languages do you work in?

Our sales team communicates in English, Russian and Spanish, and product documentation (TDS, MSDS, COA) is available in these three languages.

This website is published in English, Spanish and Russian with matching pages — switch languages from the navigation menu.

What is the difference between PAC grades (28%, 30%, 10–18% liquid)?

PAC grades differ mainly in Al₂O₃ content and physical form, which trade off freight cost, dissolution behaviour and dosing precision. A 28% spray-dried powder is the standard export grade; 30% is a higher-purity product with lower water insolubles for sensitive duties, costing more per tonne but less per tonne of active alumina. Liquid PAC at 10–18% Al₂O₃ removes the need for dissolution equipment and dust control, but you pay freight on 82–90% water, so liquid is economic only within a short delivery radius or where the plant has no powder-handling capability.

Choose the grade from your water and your dosing system: powder where storage and dissolution are available and freight matters, liquid where dosing is automatic and the supplier is close. For the same water, all three grades can meet the same turbidity target — the difference is the delivered cost per m³ treated, not the chemistry.

How should I determine the correct coagulant or flocculant dosage?

The correct dose is established by a jar test on a representative water or sludge sample, not by a catalogue figure. Run 4–6 beakers at increasing doses of the same chemical, apply identical rapid-mix (about 200–250 rpm for 1–2 minutes) and slow-mix (30–50 rpm for 10–15 minutes) stages, then let them settle for 10–30 minutes and record turbidity, suspended solids or total phosphorus against the dose.

Choose the lowest dose that meets the target with a visible margin, because the dose–response curve flattens near the optimum and extra chemical buys very little. Scale up by multiplying the jar-test ppm by plant flow to get kg/d, expect full-scale consumption around 1.2–1.5 times the bench value, and trim it once the plant has run steadily for a week. Repeat the test when the raw water changes seasonally or a new batch of chemical arrives.

How much alkalinity does nitrification consume?

Nitrification consumes about 7.14 mg/L of alkalinity as CaCO₃ for every mg/L of ammonia nitrogen (NH₄-N) oxidised, because the bacteria convert ammonium to nitrate and release hydrogen ions in the process. In a plant nitrifying 30 mg/L NH₄-N this alone removes roughly 214 mg/L of alkalinity, which will pull pH down unless the influent carries enough buffer or alkali is dosed.

Keep a residual alkalinity of about 70–100 mg/L as CaCO₃ at the end of nitrification to hold pH near neutral and protect the biomass; below that, pH can fall quickly and nitrification slows just when it is needed most. Where alkalinity is short, supplement with sodium bicarbonate, sodium carbonate or lime — and allow for the additional solids each kilogram of alkali adds to the sludge.

How do I estimate PAC or PFS dose for chemical phosphorus removal?

Estimate the dose from the molar ratio: start at 1.5–2.5 mol of metal (Al or Fe) per mol of phosphorus to be removed, and raise the ratio as the target concentration falls. Convert to product mass using the phosphorus load and the Al₂O₃ or Fe content — for example, 1 mg/L of TP at 1,000 m³/d is 1 kg/d of phosphorus, which at an Al:P molar ratio of 2.0 needs about 1.74 kg/d of aluminium, or roughly 12 kg/d of PAC at 28% Al₂O₃ before allowing for process efficiency.

Because actual efficiency depends on pH, competing ions and mixing, treat the calculated figure as a starting point and confirm it with a jar test across 4–6 doses on your own water. Field consumption commonly lands 20–50% above the stoichiometric value, so order the first batch with that margin and adjust on the plant data rather than on the calculation alone.

Commercial terms below reflect our standard export practice; binding terms are always confirmed in your written quotation.

Request a quotation

Send your product, quantity and destination port — you will receive an offer with specifications, packaging and lead time.