Municipal Wastewater
Coagulation, phosphorus polishing, sludge dewatering and effluent disinfection for city sewage works.
Municipal wastewater treatment removes suspended solids, organic matter (BOD/COD), nutrients (nitrogen and phosphorus) and pathogens from domestic sewage before safe discharge or reuse. Chemical support concentrates on four points: primary coagulation, tertiary phosphorus polishing, sludge dewatering and final disinfection.
Plants facing strict total phosphorus limits typically combine PAC or PFS dosing at 30–100 ppm with downstream filtration, then condition biological sludge with cationic PAM ahead of belt presses or centrifuges. Final effluent is disinfected with sodium hypochlorite before discharge.
We supply these chemicals in export-grade packaging with batch COA, and support plants and EPC contractors with dosing recommendations for their actual raw water — including jar-test protocols on request.
Common challenges
- Phosphorus limits tightening below 0.5 mg/L TP where biological removal alone is insufficient
- Sludge handling costs rising as volumes grow and cake dryness requirements increase
- Seasonal load swings destabilizing biological performance
- Foaming events in aeration basins tripping instruments and causing odour complaints
Recommended treatment approach
- 1
Primary/tertiary coagulation: PAC spray-dried powder at 30–100 ppm for SS and TP reduction; switch to PFS where ultra-low phosphorus or sulphide control is needed.
- 2
Nutrient polishing: small-dose PFS ahead of final filters for the last 0.1–0.3 mg/L of TP.
- 3
Sludge line: cationic PAM (charge 40–55%) before dewatering machines; anionic PAM for thickening of mineral-rich streams.
- 4
Disinfection: sodium hypochlorite with residual chlorine control after the contact tank.
- 5
Foam control: silicone or polyether defoamer at foam points in aeration and MBR tanks.
Products typically used
PAC Poly Aluminium Chloride (PAC)
Coagulants & Flocculants
Inorganic polymer coagulant for suspended solids, phosphorus and colour removal
View product
PFS Poly Ferric Sulfate (PFS)
Coagulants & Flocculants
Iron-based polymer coagulant with strong phosphorus and sulphide removal
View product
CPAM Cationic Polyacrylamide (CPAM)
Coagulants & Flocculants
Charge-neutralizing flocculant for organic sludge dewatering and biosolids conditioning
View product
APAM Anionic Polyacrylamide (APAM)
Coagulants & Flocculants
High-molecular-weight flocculant for sedimentation, flotation and sludge dewatering
View product
NaOCl Sodium Hypochlorite
Oxidizers & Disinfectants
Oxidizing disinfectant for effluent polishing, cyanide oxidation and odour control
View product
Antifoam / Defoamer
Specialty Chemicals
Silicone-based foam control for aeration basins, MBR and biological treatment
View productRequest a quotation
Send your product, quantity and destination port — you will receive an offer with specifications, packaging and lead time.