Industrial Wastewater
Coagulation with PAC/PFS, PAM flocculation and biological-support chemistry for manufacturing plant effluent.
Industrial wastewater covers the effluent of manufacturing plants — chemical processing, metal finishing, food production, textiles and general factory discharge. Depending on the source it carries suspended solids, oils and grease, heavy metals, high COD/BOD and colour that must be reduced before the stream enters a biological stage or is discharged to a municipal network.
Chemical dosing concentrates on the front of the train: coagulation with PAC or PFS to destabilize colloids and drop out solids and part of the COD, flocculation with anionic PAM to build fast-settling flocs, then biological treatment where biological-support chemicals and antiscalants keep the downstream process stable. Cationic PAM conditions the resulting sludge ahead of filter presses or centrifuges.
We supply these chemicals from Zhengzhou in export-grade packaging with batch COA for every shipment, and support plants and EPC contractors with dosing selection for their actual effluent — including jar-test protocols on request.
Common challenges
- Raw water quality swinging with production campaigns, making fixed coagulant doses under- or over-dosed
- Refractory COD fractions that pass through conventional biological treatment unremoved
- Mixed-metal and oily streams requiring pH correction and emulsion breaking before coagulation can work
- Sludge volumes from chemical pre-treatment adding significantly to dewatering and disposal costs
Recommended treatment approach
- 1
Pre-treatment coagulation: PAC spray-dried powder at 50–200 ppm as the workhorse dose for solids and COD reduction; switch to PFS at 50–150 ppm where heavier colloids, sulphides or extra colour removal are needed.
- 2
Flocculation: anionic PAM at 0.5–3 ppm immediately after the coagulant to form large, shear-resistant flocs for clarifiers and DAF units.
- 3
Biological support: antiscalant on reuse/RO lines, biocide for non-biological water circuits, and targeted helpers — COD degrader for refractory organics, ammonium remover for ammonia spikes, phosphorus remover for nutrient limits.
- 4
Heavy-metal polishing: where metals survive precipitation, a DTC-based heavy-metal catcher at 10–50 ppm binds chelated ions ahead of final filtration.
- 5
Sludge line: cationic PAM (charge 40–55%) before filter presses or centrifuges; defoamer at aeration basins and thickeners where foam events occur.
Products typically used
PAC Poly Aluminium Chloride (PAC)
Coagulants & Flocculants
Inorganic polymer coagulant for suspended solids, phosphorus and colour removal
View product
PFS Poly Ferric Sulfate (PFS)
Coagulants & Flocculants
Iron-based polymer coagulant with strong phosphorus and sulphide removal
View product
APAM Anionic Polyacrylamide (APAM)
Coagulants & Flocculants
High-molecular-weight flocculant for sedimentation, flotation and sludge dewatering
View product
CPAM Cationic Polyacrylamide (CPAM)
Coagulants & Flocculants
Charge-neutralizing flocculant for organic sludge dewatering and biosolids conditioning
View product
Antifoam / Defoamer
Specialty Chemicals
Silicone-based foam control for aeration basins, MBR and biological treatment
View product
Antiscalant / Scale Inhibitor (Phosphonate-Polymer Blend)
Specialty Chemicals
Phosphonate-polymer antiscalant for RO membranes, evaporators and cooling-water circuits
View product
Broad-Spectrum Biocide (Isothiazolinone CMIT/MIT)
Specialty Chemicals
CMIT/MIT isothiazolinone biocide for biofilm, bacteria and fungi control in water systems
View product
COD Degrader (Catalyzed Oxidant Blend)
Advanced Treatment Chemicals
Persulfate/chlorite catalyzed oxidant for refractory COD in biological effluent
View product
Ammonia Nitrogen Remover (MAP Precipitation Reagent)
Advanced Treatment Chemicals
Magnesium-salt reagent that strips ammonia nitrogen by struvite (MAP) precipitation
View product
Phosphorus Remover (Iron-Aluminium Blend)
Advanced Treatment Chemicals
High-basicity polymeric iron-aluminium agent for deep phosphorus removal
View product
Heavy Metal Capture Agent (DTC Dithiocarbamate)
Advanced Treatment Chemicals
Dithiocarbamate chelating agent that precipitates heavy metals to discharge limits
View productRequest a quotation
Send your product, quantity and destination port — you will receive an offer with specifications, packaging and lead time.