Hanna Env logo HannaEnv

Antiscalant / Scale Inhibitor (Phosphonate-Polymer Blend)

Phosphonate-polymer antiscalant for RO membranes, evaporators and cooling-water circuits

CAS No. Mixture HS code 3824.99 Specialty Chemicals
Antiscalant / Scale Inhibitor (Phosphonate-Polymer Blend)

This antiscalant is a phosphonate-polymer formulation (HEDP/PBTCA-type phosphonates blended with polycarboxylate dispersants) that controls CaCO₃, CaSO₄, BaSO₄ and SrSO₄ scale plus iron and silica fouling in membrane and thermal systems. Dosed continuously at 2–6 ppm, it delays nucleation and distorts crystal growth so sparingly soluble salts stay in solution past the recovery limit of the process.

A properly matched antiscalant lets RO trains run at higher recovery without acid dosing, cuts cleaning frequency, and extends membrane life; for evaporators and cooling circuits it protects heat-transfer surfaces where even sub-ppm hardness concentrates to deposits. Selection depends on water chemistry — Langelier saturation, sulfate/halide levels and silica — so feed-water analysis should guide the dosage calculation.

We export this liquid antiscalant in 25 L and 200 L drums and IBC totes from Zhengzhou, Henan, with batch COA for every shipment and support for dosage projection from your water analysis.

Technical specifications

Technical specifications
Technical specifications Unit Value
Solid content % ≥ 30.0
Total phosphorus (as P) % ≥ 3.0
pH (1% aqueous solution) — 2.0 ± 0.5
Density (20 °C) g/cm³ 1.10–1.25
Chloride (Cl) ppm ≤ 10
Viscosity (25 °C) — Water-thin to light
Appearance — Colorless to pale yellow liquid

Typical values for reference only. Final specifications are confirmed per batch COA, available with every shipment.

Applications

  • Scale and silica control in reverse osmosis and nanofiltration trains at 2–6 ppm dosing
  • Evaporator and MVR concentration circuits — protection of heat exchangers at extreme brine supersaturation
  • Open recirculating cooling towers — CaCO₃ control with dispersancy for iron oxides and silt
  • Boiler feed and process water pre-treatment in high-hardness source waters

Industries & Solutions: Industrial Wastewater, Food & Beverage Wastewater, Municipal Wastewater 

Packaging & shipping

Packaging Net weight / volume
HDPE drum 25 / 200 L
IBC tote 1000 L

Storage & shelf life

Store in a dry, ventilated warehouse between 5–35 °C, away from strong alkalis and oxidizers. Keep containers sealed. Shelf life 12 months in original sealed packaging.

Transport classification

Not classified as a dangerous good under IMDG/IATA and ships as general cargo (weakly acidic — corrosion precautions apply).

Safety

Weakly acidic liquid; may cause eye and skin irritation. Avoid contact with strong alkalis. Wear gloves and goggles when dosing. Full handling details in the MSDS available on request.

Downloads

Request a quotation for Antiscalant / Scale Inhibitor (Phosphonate-Polymer Blend)

Send Inquiry

We use your data only to answer your inquiry. See our Privacy Policy.

Request a quotation

Send your product, quantity and destination port — you will receive an offer with specifications, packaging and lead time.

Get a Quote Chat on WhatsApp